🔗 Oryginalny URL · ← Powrót do listy
| Kategoria | budowa |
|---|---|
| Podkategoria | budowlane |
| Zamawiający | Bechtel Polska Sp. z o. o. |
| Szacowana wartość | — |
| Termin składania | 2026-04-20T17:00:00+02:00 |
| Lokalizacja | Gdańsk (woj. pomorskie) |
| Ocena istotności | 8/10 |
| Opis | Engineering and construction services (EPC) for temporary warehousing structures and fabrication shops supporting the Poland Nuclear Power Plant. Scope includes supply, installation, testing, and commissioning of 3 warehouse buildings (total 22,170 m²) and 11 fabrication buildings (total 20,735 m²) with structural, mechanical, electrical, and fire protection systems, excluding production lines. |
| Kody CPV | ["Full design responsibility by seller, sealed by licensed Polish engineers/architects","Compliance with Polish law, EU directives, and project specifications","Design life of 15 years in Baltic coastal environment","Electric-only buildings; no gas installations","No permanent water or sewage systems; portable handwash stations only","Expression of interest deadline: 20/04/2026 17:00 CEST","Electronic submission required at Bechtel project website","Procedure: Negotiation with prior publication"] |
| Model AI | deepseek/deepseek-v4-flash |
| Tokeny (wejście/wyjście) | 5020 / 2404 |
| Czas procesowania | 24795 ms |
| Sklasyfikowano | 2026-07-16 08:16:29 |
See the notice on TED website 237943-2026 - Procedura konkurencyjna Polska – Roboty budowlane w zakresie magazynów i przemysłowych obiektów budowlanych – Temporary Warehousing Structure and Fabrication Shops (EPC) – Poland AP1000 Project OJ S 68/2026 08/04/2026 Wstępne ogłoszenie informacyjne lub okresowe ogłoszenie informacyjne wykorzystywane jako zaproszenie do ubiegania się o zamówienie – tryb standardowy Roboty budowlane 1. Nabywca 1.1. Nabywca Oficjalna nazwa: Bechtel Polska Sp. z o. o. E-mail: mkalandy@bechtel.com Status prawny nabywcy: Organizacja udzielająca zamówienia dotowanego przez instytucję administracji centralnej Sektor działalności instytucji zamawiającej: Ogólne usługi publiczne 2. Procedura 2.1. Procedura Tytuł: Temporary Warehousing Structure and Fabrication Shops (EPC) – Poland AP1000 Project Opis: 1. Experienced and qualified Companies are invited to provide engineering and construction services, including supply, installation, testing and commissioning of Temporary Warehousing Structure and Fabrication Shops (commodity code UA11) at the project location for the Poland Nuclear Power Plant. The facilities are industrial standard, temporary, nonsafety related, non-seismic, commercial-grade steel buildings, intended solely to support construction activities and not plant operations. All works must comply with Polish law, EU standards, and Authority Having Jurisdiction (AHJ) requirements, with the Pomeranian Voivode acting as AHJ. General Building Characteristics: - Structures are steel-framed, modular or pre-engineered metal buildings (PEMB). - Buildings are single-story, rectangular, low-rise, with pitched roofs. - Facilities must remain fully operational year-round in a Baltic coastal environment for a design life of 15 years. - All buildings are electric-only; no gas installations are permitted. - Uniform construction technology, finishes, and systems must be applied across all buildings for each of two types of buildings: warehouses and fabrication shops. - All furnish and production lines are excluded from the scope, the subject of the bid is limited to the solely buildings only. Temporary Warehousing Buildings – Quantity and Size 3 temporary warehouse buildings, total area 22,170 m²: - Warehouse 182: 8,400 m² (120 × 70 × 10 m) - Warehouse 183: 7,650 m² (150 × 51 × 10 m) - Warehouse 184: 6,120 m² (120 × 51 × 10 m) Structural and Architectural Requirements - Reinforced concrete slab foundations designed for heavy material handling. - Steel superstructure enclosed with insulated metal wall and roof panels. - Fire-resistant construction materials. - Concrete floor finish throughout. Light-colored exterior siding and roofing. Functional Requirements - Areas for receiving, unpacking, sorting, staging, and “on-hold” materials. - Segregated storage for tools, instruments, piping, electrical materials, and hazardous goods. - Pallet racking, shelving, bins, and forklift-compatible aisle spacing. - Rapid roll-up material doors (minimum 6 m clearance). Minimum four personnel/emergency exits per building. - Climate control (heating, ventilation, and cooling where required). - Access control via card, mobile app, or biometric systems. 237943-2026 Page 1/9 Adequate drainage, lighting, and proximity to work fronts. - Overhead crane in the warehouse No. 184 Temporary Fabrication Shops – Quantity and Size 11 fabrication buildings, total area 20,735 m². Each building: 1,885 m² (65 × 29 × 10 m). Structural and Architectural Requirements - Reinforced concrete slab foundations. - Commercial-grade steel superstructure. - Insulated metal siding and roofing. - Fully enclosed, climate-controlled environments. - Ventilated. Functional Requirements - Fabrication lines and material handling areas. - Tool and equipment storage with secure access. - Rapid roll-up material doors and personnel exits. - Fire-resistant materials and systems. - HVAC systems. - Adequate site drainage and lighting. - Layout flexibility subject to Buyer approval. Building Systems and Installations (Applicable to All Buildings) Structural - Designed for dead, live, wind, snow loads. - Anchored steel structures on reinforced concrete slabs. Mechanical (HVAC) - Air handling units with heating, cooling, filtration, and heat recovery. - Dedicated ventilation systems for warehouses and workshops. - Electric-powered systems only. - No permanent water or sewage systems; portable handwash stations only. Fire Protection - Fire classification per Polish regulations (ZL I or as determined). - Fire alarm system. - Emergency lighting. - Internal hydrants (25 mm), fire extinguishers, fire dampers. - External hydrants with 20 dm³/s water flow. - Fire access roads and rescue provisions. Electrical - 400/230 V, 50 Hz TN-S earthing system. - Main distribution panels and sub-panels. - LED lighting (normal and emergency). Emergency lighting minimum 90 minutes autonomy. - IP54-rated electrical enclosures. Lightning protection per PN-EN 62305. Design, Permits, and Compliance - Seller responsible for full design, engineering, and coordination. - Final Design must be sealed by licensed Polish engineers/architects. - Compliance with Polish law, EU directives, and project specifications is mandatory. The detailed scope of work will be outlined in the specifications, scope documents, and other contractual materials provided to the Companies within the Request of Quotation. Identyfikator procedury: debfb168-22bb-4097-88df-a6b85f6bfae7 Rodzaj procedury: Negocjacyjna z uprzednią publikacją zaproszenia do ubiegania się o zamówienie / konkurencyjna z negocjacjami 2.1.1. Przeznaczenie Charakter zamówienia: Roboty budowlane Główna klasyfikacja (cpv): 45213200 Roboty budowlane w zakresie magazynów i przemysłowych obiektów budowlanych 2.1.2. Miejsce realizacji Podpodział krajowy (NUTS): Gdański (PL634) Kraj: Polska 2.1.4. Informacje ogólne Podstawa prawna: Dyrektywa 2014/24/UE 2.1.6. Podstawy wykluczenia Powody wykluczenia źródła: Dokumenty zamówienia 5. Część zamówienia 5.1. Część zamówienia: LOT-0001 Tytuł: Temporary Warehousing Structure and Fabrication Shops (EPC) – Poland AP1000 Project Opis: 1. Experienced and qualified Companies are invited to provide engineering and construction services, including supply, installation, testing and commissioning of Temporary 237943-2026 Page 2/9 Warehousing Structure and Fabrication Shops (commodity code UA11) at the project location for the Poland Nuclear Power Plant. The facilities are industrial standard, temporary, nonsafety related, non-seismic, commercial-grade steel buildings, intended solely to support construction activities and not plant operations. All works must comply with Polish law, EU standards, and Authority Having Jurisdiction (AHJ) requirements, with the Pomeranian Voivode acting as AHJ. General Building Characteristics: - Structures are steel-framed, modular or pre-engineered metal buildings (PEMB). - Buildings are single-story, rectangular, low-rise, with pitched roofs. - Facilities must remain fully operational year-round in a Baltic coastal environment for a design life of 15 years. - All buildings are electric-only; no gas installations are permitted. - Uniform construction technology, finishes, and systems must be applied across all buildings for each of two types of buildings: warehouses and fabrication shops. - All furnish and production lines are excluded from the scope, the subject of the bid is limited to the solely buildings only. Temporary Warehousing Buildings – Quantity and Size 3 temporary warehouse buildings, total area 22,170 m²: - Warehouse 182: 8,400 m² (120 × 70 × 10 m) - Warehouse 183: 7,650 m² (150 × 51 × 10 m) - Warehouse 184: 6,120 m² (120 × 51 × 10 m) Structural and Architectural Requirements - Reinforced concrete slab foundations designed for heavy material handling. - Steel superstructure enclosed with insulated metal wall and roof panels. - Fire-resistant construction materials. - Concrete floor finish throughout. Light-colored exterior siding and roofing. Functional Requirements - Areas for receiving, unpacking, sorting, staging, and “on-hold” materials. - Segregated storage for tools, instruments, piping, electrical materials, and hazardous goods. - Pallet racking, shelving, bins, and forklift-compatible aisle spacing. - Rapid roll-up material doors (minimum 6 m clearance). Minimum four personnel/emergency exits per building. - Climate control (heating, ventilation, and cooling where required). - Access control via card, mobile app, or biometric systems. Adequate drainage, lighting, and proximity to work fronts. - Overhead crane in the warehouse No. 184 Temporary Fabrication Shops – Quantity and Size 11 fabrication buildings, total area 20,735 m². Each building: 1,885 m² (65 × 29 × 10 m). Structural and Architectural Requirements - Reinforced concrete slab foundations. - Commercial-grade steel superstructure. - Insulated metal siding and roofing. - Fully enclosed, climate-controlled environments. - Ventilated. Functional Requirements - Fabrication lines and material handling areas. - Tool and equipment storage with secure access. - Rapid roll-up material doors and personnel exits. - Fire-resistant materials and systems. - HVAC systems. - Adequate site drainage and lighting. - Layout flexibility subject to Buyer approval. Building Systems and Installations (Applicable to All Buildings) Structural - Designed for dead, live, wind, snow loads. - Anchored steel structures on reinforced concrete slabs. Mechanical (HVAC) - Air handling units with heating, cooling, filtration, and heat recovery. - Dedicated ventilation systems for warehouses and workshops. - Electric-powered systems only. - No permanent water or sewage systems; portable handwash stations only. Fire Protection - Fire classification per Polish regulations (ZL I or as determined). - Fire alarm system. - Emergency lighting. - Internal hydrants (25 mm), fire extinguishers, fire dampers. - External hydrants with 20 dm³/s water flow. - Fire access roads and rescue provisions. Electrical - 400/230 V, 50 Hz TN-S earthing system. - Main distribution panels and sub-panels. - LED lighting (normal and emergency). Emergency lighting minimum 90 minutes autonomy. - IP54-rated electrical enclosures. Lightning protection per PN-EN 62305. Design, Permits, and Compliance - Seller responsible for full design, engineering, and coordination. - Final Design must be sealed by licensed Polish engineers/architects. - Compliance with Polish law, EU directives, and project specifications is mandatory. The detailed scope of work will be outlined in the specifications, scope documents, and other contractual materials provided to the Companies within the Request of Quotation. 5.1.1. Przeznaczenie 237943-2026 Page 3/9 Charakter zamówienia: Roboty budowlane Główna klasyfikacja (cpv): 45213200 Roboty budowlane w zakresie magazynów i przemysłowych obiektów budowlanych 5.1.2. Miejsce realizacji Podpodział krajowy (NUTS): Gdański (PL634) Kraj: Polska 5.1.3. Szacowany okres obowiązywania Inny okres: Nieznany 5.1.6. Informacje ogólne Zastrzeżony udział: Udział nie jest zastrzeżony. Projekt zamówienia niefinansowany z funduszy UE Zamówienie jest objęte zakresem Porozumienia w sprawie zamówień rządowych (GPA): nie 5.1.9. Kryteria kwalifikacji Źródła kryteriów wyboru: Dokumenty zamówienia 5.1.12. Warunki udzielenia zamówienia Warunki procedury: Przewidywana data wysłania zaproszeń do potwierdzenia zainteresowania: 24/04/2026 Przewidywana data wysłania zaproszeń do składania ofert: 23/06/2026 Warunki zgłoszenia: Zgłoszenie elektroniczne: Wymagane Adres na potrzeby zgłoszenia: https://www.bechtel.com/projects/poland-api000-nuclear-powerplant/ Języki, w których można składać oferty lub wnioski o dopuszczenie do udziału: angielski Termin wyrażenia zainteresowania: 20/04/2026 17:00:00 (UTC+02:00) czas wschodnioeuropejski, czas środkowoeuropejski letni Warunki zamówienia: Wykonanie zamówienia musi odbywać się w ramach programów zatrudnienia chronionego: Nie 5.1.15. Techniki Umowa ramowa: Brak umowy ramowej Informacje o dynamicznym systemie zakupów: Brak dynamicznego systemu zakupów 5.1.16. Dalsze informacje, mediacja i odwołanie Organ odwoławczy: Bechtel Polska Sp. z o. o. Informacje o terminach odwołania: na Organizacja udzielająca dodatkowych informacji na temat postępowania o udzielenie zamówienia: Bechtel Polska Sp. z o. o. Organizacja udzielająca dodatkowych informacji na temat procedur odwoławczych: Bechtel Polska Sp. z o. o. 5.1. Część zamówienia: LOT-0002 Tytuł: Temporary Warehousing Structure and Fabrication Shops (EPC) – Poland AP1000 Project Opis: 1. Experienced and qualified Companies are invited to provide engineering and construction services, including supply, installation, testing and commissioning of Temporary 237943-2026 Page 4/9 Warehousing Structure and Fabrication Shops (commodity code UA11) at the project location for the Poland Nuclear Power Plant. The facilities are industrial standard, temporary, nonsafety related, non-seismic, commercial-grade steel buildings, intended solely to support construction activities and not plant operations. All works must comply with Polish law, EU standards, and Authority Having Jurisdiction (AHJ) requirements, with the Pomeranian Voivode acting as AHJ. General Building Characteristics: - Structures are steel-framed, modular or pre-engineered metal buildings (PEMB). - Buildings are single-story, rectangular, low-rise, with pitched roofs. - Facilities must remain fully operational year-round in a Baltic coastal environment for a design life of 15 years. - All buildings are electric-only; no gas installations are permitted. - Uniform construction technology, finishes, and systems must be applied across all buildings for each of two types of buildings: warehouses and fabrication shops. - All furnish and production lines are excluded from the scope, the subject of the bid is limited to the solely buildings only. Temporary Warehousing Buildings – Quantity and Size 3 temporary warehouse buildings, total area 22,170 m²: - Warehouse 182: 8,400 m² (120 × 70 × 10 m) - Warehouse 183: 7,650 m² (150 × 51 × 10 m) - Warehouse 184: 6,120 m² (120 × 51 × 10 m) Structural and Architectural Requirements - Reinforced concrete slab foundations designed for heavy material handling. - Steel superstructure enclosed with insulated metal wall and roof panels. - Fire-resistant construction materials. - Concrete floor finish throughout. Light-colored exterior siding and roofing. Functional Requirements - Areas for receiving, unpacking, sorting, staging, and “on-hold” materials. - Segregated storage for tools, instruments, piping, electrical materials, and hazardous goods. - Pallet racking, shelving, bins, and forklift-compatible aisle spacing. - Rapid roll-up material doors (minimum 6 m clearance). Minimum four personnel/emergency exits per building. - Climate control (heating, ventilation, and cooling where required). - Access control via card, mobile app, or biometric systems. Adequate drainage, lighting, and proximity to work fronts. - Overhead crane in the warehouse No. 184 Temporary Fabrication Shops – Quantity and Size 11 fabrication buildings, total area 20,735 m². Each building: 1,885 m² (65 × 29 × 10 m). Structural and Architectural Requirements - Reinforced concrete slab foundations. - Commercial-grade steel superstructure. - Insulated metal siding and roofing. - Fully enclosed, climate-controlled environments. - Ventilated. Functional Requirements - Fabrication lines and material handling areas. - Tool and equipment storage with secure access. - Rapid roll-up material doors and personnel exits. - Fire-resistant materials and systems. - HVAC systems. - Adequate site drainage and lighting. - Layout flexibility subject to Buyer approval. Building Systems and Installations (Applicable to All Buildings) Structural - Designed for dead, live, wind, snow loads. - Anchored steel structures on reinforced concrete slabs. Mechanical (HVAC) - Air handling units with heating, cooling, filtration, and heat recovery. - Dedicated ventilation systems for warehouses and workshops. - Electric-powered systems only. - No permanent water or sewage systems; portable handwash stations only. Fire Protection - Fire classification per Polish regulations (ZL I or as determined). - Fire alarm system. - Emergency lighting. - Internal hydrants (25 mm), fire extinguishers, fire dampers. - External hydrants with 20 dm³/s water flow. - Fire access roads and rescue provisions. Electrical - 400/230 V, 50 Hz TN-S earthing system. - Main distribution panels and sub-panels. - LED lighting (normal and emergency). Emergency lighting minimum 90 minutes autonomy. - IP54-rated electrical enclosures. Lightning protection per PN-EN 62305. Design, Permits, and Compliance - Seller responsible for full design, engineering, and coordination. - Final Design must be sealed by licensed Polish engineers/architects. - Compliance with Polish law, EU directives, and project specifications is mandatory. The detailed scope of work will be outlined in the specifications, scope documents, and other contractual materials provided to the Companies within the Request of Quotation. 5.1.1. Przeznaczenie 237943-2026 Page 5/9 Charakter zamówienia: Roboty budowlane Główna klasyfikacja (cpv): 45213200 Roboty budowlane w zakresie magazynów i przemysłowych obiektów budowlanych 5.1.2. Miejsce realizacji Podpodział krajowy (NUTS): Gdański (PL634) Kraj: Polska 5.1.3. Szacowany okres obowiązywania Inny okres: Nieznany 5.1.6. Informacje ogólne Zastrzeżony udział: Udział nie jest zastrzeżony. Projekt zamówienia niefinansowany z funduszy UE Zamówienie jest objęte zakresem Porozumienia w sprawie zamówień rządowych (GPA): nie 5.1.9. Kryteria kwalifikacji Źródła kryteriów wyboru: Dokumenty zamówienia 5.1.12. Warunki udzielenia zamówienia Warunki procedury: Przewidywana data wysłania zaproszeń do potwierdzenia zainteresowania: 24/04/2026 Przewidywana data wysłania zaproszeń do składania ofert: 23/06/2026 Warunki zgłoszenia: Zgłoszenie elektroniczne: Wymagane Adres na potrzeby zgłoszenia: https://www.bechtel.com/projects/poland-api000-nuclear-powerplant/ Języki, w których można składać oferty lub wnioski o dopuszczenie do udziału: angielski Termin wyrażenia zainteresowania: 10/04/2026 17:00:00 (UTC+02:00) czas wschodnioeuropejski, czas środkowoeuropejski letni Warunki zamówienia: Wykonanie zamówienia musi odbywać się w ramach programów zatrudnienia chronionego: Nie 5.1.15. Techniki Umowa ramowa: Brak umowy ramowej Informacje o dynamicznym systemie zakupów: Brak dynamicznego systemu zakupów 5.1.16. Dalsze informacje, mediacja i odwołanie Organ odwoławczy: Bechtel Polska Sp. z o. o. Informacje o terminach odwołania: na Organizacja udzielająca dodatkowych informacji na temat postępowania o udzielenie zamówienia: Bechtel Polska Sp. z o. o. Organizacja udzielająca dodatkowych informacji na temat procedur odwoławczych: Bechtel Polska Sp. z o. o. 5.1. Część zamówienia: LOT-0003 Tytuł: Temporary Warehousing Structure and Fabrication Shops (EPC) – Poland AP1000 Project Opis: 1. Experienced and qualified Companies are invited to provide engineering and construction services, including supply, installation, testing and commissioning of Temporary 237943-2026 Page 6/9 Warehousing Structure and Fabrication Shops (commodity code UA11) at the project location for the Poland Nuclear Power Plant. The facilities are industrial standard, temporary, nonsafety related, non-seismic, commercial-grade steel buildings, intended solely to support construction activities and not plant operations. All works must comply with Polish law, EU standards, and Authority Having Jurisdiction (AHJ) requirements, with the Pomeranian Voivode acting as AHJ. General Building Characteristics: - Structures are steel-framed, modular or pre-engineered metal buildings (PEMB). - Buildings are single-story, rectangular, low-rise, with pitched roofs. - Facilities must remain fully operational year-round in a Baltic coastal environment for a design life of 15 years. - All buildings are electric-only; no gas installations are permitted. - Uniform construction technology, finishes, and systems must be applied across all buildings for each of two types of buildings: warehouses and fabrication shops. - All furnish and production lines are excluded from the scope, the subject of the bid is limited to the solely buildings only. Temporary Warehousing Buildings – Quantity and Size 3 temporary warehouse buildings, total area 22,170 m²: - Warehouse 182: 8,400 m² (120 × 70 × 10 m) - Warehouse 183: 7,650 m² (150 × 51 × 10 m) - Warehouse 184: 6,120 m² (120 × 51 × 10 m) Structural and Architectural Requirements - Reinforced concrete slab foundations designed for heavy material handling. - Steel superstructure enclosed with insulated metal wall and roof panels. - Fire-resistant construction materials. - Concrete floor finish throughout. Light-colored exterior siding and roofing. Functional Requirements - Areas for receiving, unpacking, sorting, staging, and “on-hold” materials. - Segregated storage for tools, instruments, piping, electrical materials, and hazardous goods. - Pallet racking, shelving, bins, and forklift-compatible aisle spacing. - Rapid roll-up material doors (minimum 6 m clearance). Minimum four personnel/emergency exits per building. - Climate control (heating, ventilation, and cooling where required). - Access control via card, mobile app, or biometric systems. Adequate drainage, lighting, and proximity to work fronts. - Overhead crane in the warehouse No. 184 Temporary Fabrication Shops – Quantity and Size 11 fabrication buildings, total area 20,735 m². Each building: 1,885 m² (65 × 29 × 10 m). Structural and Architectural Requirements - Reinforced concrete slab foundations. - Commercial-grade steel superstructure. - Insulated metal siding and roofing. - Fully enclosed, climate-controlled environments. - Ventilated. Functional Requirements - Fabrication lines and material handling areas. - Tool and equipment storage with secure access. - Rapid roll-up material doors and personnel exits. - Fire-resistant materials and systems. - HVAC systems. - Adequate site drainage and lighting. - Layout flexibility subject to Buyer approval. Building Systems and Installations (Applicable to All Buildings) Structural - Designed for dead, live, wind, snow loads. - Anchored steel structures on reinforced concrete slabs. Mechanical (HVAC) - Air handling units with heating, cooling, filtration, and heat recovery. - Dedicated ventilation systems for warehouses and workshops. - Electric-powered systems only. - No permanent water or sewage systems; portable handwash stations only. Fire Protection - Fire classification per Polish regulations (ZL I or as determined). - Fire alarm system. - Emergency lighting. - Internal hydrants (25 mm), fire extinguishers, fire dampers. - External hydrants with 20 dm³/s water flow. - Fire access roads and rescue provisions. Electrical - 400/230 V, 50 Hz TN-S earthing system. - Main distribution panels and sub-panels. - LED lighting (normal and emergency). Emergency lighting minimum 90 minutes autonomy. - IP54-rated electrical enclosures. Lightning protection per PN-EN 62305. Design, Permits, and Compliance - Seller responsible for full design, engineering, and coordination. - Final Design must be sealed by licensed Polish engineers/architects. - Compliance with Polish law, EU directives, and project specifications is mandatory. The detailed scope of work will be outlined in the specifications, scope documents, and other contractual materials provided to the Companies within the Request of Quotation. 5.1.1. Przeznaczenie 237943-2026 Page 7/9 Charakter zamówienia: Roboty budowlane Główna klasyfikacja (cpv): 45213200 Roboty budowlane w zakresie magazynów i przemysłowych obiektów budowlanych 5.1.2. Miejsce realizacji Podpodział krajowy (NUTS): Gdański (PL634) Kraj: Polska 5.1.3. Szacowany okres obowiązywania Inny okres: Nieznany 5.1.6. Informacje ogólne Zastrzeżony udział: Udział nie jest zastrzeżony. Projekt zamówienia niefinansowany z funduszy UE Zamówienie jest objęte zakresem Porozumienia w sprawie zamówień rządowych (GPA): nie 5.1.9. Kryteria kwalifikacji Źródła kryteriów wyboru: Dokumenty zamówienia 5.1.12. Warunki udzielenia zamówienia Warunki procedury: Przewidywana data wysłania zaproszeń do potwierdzenia zainteresowania: 24/04/2026 Przewidywana data wysłania zaproszeń do składania ofert: 23/06/2026 Warunki zgłoszenia: Zgłoszenie elektroniczne: Wymagane Adres na potrzeby zgłoszenia: https://www.bechtel.com/projects/poland-api000-nuclear-powerplant/ Języki, w których można składać oferty lub wnioski o dopuszczenie do udziału: angielski Termin wyrażenia zainteresowania: 10/04/2026 17:00:00 (UTC+02:00) czas wschodnioeuropejski, czas środkowoeuropejski letni Warunki zamówienia: Wykonanie zamówienia musi odbywać się w ramach programów zatrudnienia chronionego: Nie 5.1.15. Techniki Umowa ramowa: Brak umowy ramowej Informacje o dynamicznym systemie zakupów: Brak dynamicznego systemu zakupów 5.1.16. Dalsze informacje, mediacja i odwołanie Organ odwoławczy: Bechtel Polska Sp. z o. o. Informacje o terminach odwołania: na Organizacja udzielająca dodatkowych informacji na temat postępowania o udzielenie zamówienia: Bechtel Polska Sp. z o. o. Organizacja udzielająca dodatkowych informacji na temat procedur odwoławczych: Bechtel Polska Sp. z o. o. 8. Organizacje 8.1. ORG-0001 Oficjalna nazwa: Bechtel Polska Sp. z o. o. 237943-2026 Page 8/9 Numer rejestracyjny: 0000820169 Adres pocztowy: Al. Jerozolimskie 100 Miejscowość: Warsaw Kod pocztowy: 00-807 Podpodział krajowy (NUTS): Miasto Warszawa (PL911) Kraj: Polska Punkt kontaktowy: Monika Kalandyk E-mail: mkalandy@bechtel.com Telefon: 780192431 Role tej organizacji: Nabywca Organizacja udzielająca dodatkowych informacji na temat postępowania o udzielenie zamówienia Organ odwoławczy Organizacja udzielająca dodatkowych informacji na temat procedur odwoławczych 8.1. ORG-0000 Oficjalna nazwa: Publications Office of the European Union Numer rejestracyjny: PUBL Miejscowość: Luxembourg Kod pocztowy: 2417 Podpodział krajowy (NUTS): Luxembourg (LU000) Kraj: Luksemburg E-mail: ted@publications.europa.eu Telefon: +352 29291 Adres strony internetowej: https://op.europa.eu Role tej organizacji: TED eSender Informacje o ogłoszeniu Identyfikator/wersja ogłoszenia: 0d3b367b-bbe0-4d7a-bd83-340983c521f3 - 01 Typ formularza: Procedura konkurencyjna Rodzaj ogłoszenia: Wstępne ogłoszenie informacyjne lub okresowe ogłoszenie informacyjne wykorzystywane jako zaproszenie do ubiegania się o zamówienie – tryb standardowy Podrodzaj ogłoszenia: 10 Ogłoszenie – data wysłania: 03/04/2026 14:41:04 (UTC+00:00) czas zachodnioeuropejski, GMT Języki, w których przedmiotowe ogłoszenie jest oficjalnie dostępne: angielski Numer publikacji ogłoszenia: 237943-2026 Numer wydania Dz.U. S: 68/2026 Data publikacji: 08/04/2026 237943-2026 Page 9/9
Engineering and construction services (EPC) for temporary warehousing structures and fabrication shops supporting the Poland Nuclear Power Plant. Scope includes supply, installation, testing, and commissioning of 3 warehouse buildings (total 22,170 m²) and 11 fabrication buildings (total 20,735 m²) with structural, mechanical, electrical, and fire protection systems, excluding production lines.
| Kategoria | budowa |
|---|---|
| Podkategoria | budowlane |
| Zamawiający | Bechtel Polska Sp. z o. o. |
| Wartość | — |
| Termin | 2026-04-20T17:00:00+02:00 |
| Lokalizacja | Gdańsk (woj. pomorskie) |
| Ocena | 8/10 |
| Model | deepseek/deepseek-v4-flash |
| Tokeny in/out | 5020 / 2404 |
{"id":"gen-1784189764-yEL34haVpkj2mSkIJ6jc","choices":[{"message":{"content":"{\n \"tytul\": \"Temporary Warehousing Structure and Fabrication Shops (EPC) – Poland AP1000 Project\",\n \"zamawiajacy\": \"Bechtel Polska Sp. z o. o.\",\n \"tryb_postepowania\": \"Negocjacyjna z uprzednią publikacją zaproszenia do ubiegania się o zamówienie / konkurencyjna z negocjacjami\",\n \"kategoria\": \"budowa\",\n \"rodzaj_robot\": \"budowlane\",\n \"lokalizacja\": \"Gdańsk (woj. pomorskie)\",\n \"zakres_prac\": \"Engineering and construction services (EPC) for temporary warehousing structures and fabrication shops supporting the Poland Nuclear Power Plant. Scope includes supply, installation, testing, and commissioning of 3 warehouse buildings (total 22,170 m²) and 11 fabrication buildings (total 20,735 m²) with structural, mechanical, electrical, and fire protection systems, excluding production lines.\",\n \"termin_skladania_ofert\": \"2026-04-20T17:00:00+02:00\",\n \"termin_wykonania\": null,\n \"wadium_pln\": null,\n \"budzet_szacowany_pln\": null,\n \"wymagane_referencje\": null,\n \"warunki_platnosci\": null,\n \"wymagana_wizja_lokalna\": false,\n \"wymagania_ubezpieczenie\": null,\n \"cpv_kody\": [\"45213200\"],\n \"numer_postepowania\": \"debfb168-22bb-4097-88df-a6b85f6bfae7\",\n \"notice_type\": \"tender\",\n \"ocena_istotnosci\": 8,\n \"kluczowe_warunki\": [\n \"Full design responsibility by seller, sealed by licensed Polish engineers/architects\",\n \"Compliance with Polish law, EU directives, and project specifications\",\n \"Design life of 15 years in Baltic coastal environment\",\n \"Electric-only buildings; no gas installations\",\n \"No permanent water or sewage systems; portable handwash stations only\",\n \"Expression of interest deadline: 20/04/2026 17:00 CEST\",\n \"Electronic submission required at Bechtel project website\",\n \"Procedure: Negotiation with prior publication\"\n ],\n \"custom_answers\": [\n \"Temporary Warehousing Structure and Fabrication Shops (EPC) – Poland AP1000 Project\",\n \"Bechtel Polska Sp. z o. o.\",\n \"Roboty budowlane polegające na zaprojektowaniu, dostawie, instalacji, testowaniu i uruchomieniu tymczasowych budynków magazynowych i warsztatowych (EPC) dla projektu elektrowni jądrowej AP1000 w Polsce\",\n \"20 kwietnia 2026, godz. 17:00 CEST (wyrażenie zainteresowania; składanie ofert właściwych planowane na później)\",\n \"Nie podano w ogłoszeniu\",\n \"Nie określono\",\n \"Nie określono szczegółowo; kryteria kwalifikacji w dokumentach zamówienia\",\n \"Nie\",\n \"Nieznany (okres inny: nieznany)\",\n \"45213200\"\n ]\n}","role":"assistant"},"finish_reason":"stop"}],"usage":{"prompt_tokens":5020,"completion_tokens":2404,"total_tokens":7424},"error":null}
procurewatch v0.1.0 — Monitorowanie polskich procurewatchów publicznych
Źródła: BZP, e-Zamówienia, TED, BIP